Traction
Floor Safety Solutions, Inc.
6925 N. Broadway
Denver, CO 80221
1.877.487.6610
303.487.6610
Contact Us
|
|
TRACTION TOUGH™ SLIP RESISTANT COATINGS
|
"UT" PRODUCT SERIES
TractionTough™ UT Series
coatings are a cross-linked acrylic urethane co-polymer, made for
extreme weather, wear, and impact resistance. Applications are
unlimited -- from warehouse, commercial & industrial to outdoor and
marine surfaces.
TractionTough™ UT Series
was designed with safety in mind while still maintaining an attractive
appearance. This product conforms to all Regulatory Compliance levels
and qualifies for the IRS Section 44 Tax Credits and Section 190 Tax
Deductions.
The UT Products
will adhere to wood, concrete, metal, fiberglass, plastic, rubber &
vinyl. They are able to be a targeted product used in large areas or in
very specific areas of concern determined by the Federal ADA guidelines
including:
#1910.231 -- "Steps with non-slip surfaces shall be provided."
#1910.236 -- "All walkways shall be maintained in a non-slip condition."
#1910.261 -- "All walkways shall have non--slip surfaces."
UT 100: UT 100 is a hard durable non-slip coating for
heavy-duty use on concrete, aluminum, and steel. It can be driven on
with auto, truck, and forklift traffic. Ideal for heavy pedestrian use,
it is highly abrasion and wear resistant.
UT 100 SR: UT 100SR is a hard durable non-slip coating
for heavy-duty use on concrete, aluminum, and steel that contains a
smaller aggregate particle than UT 100. It can be driven on with auto,
truck, and forklift traffic. Ideal for heavy pedestrian use, it is
highly abrasion and wear resistant.
UT 100 F: UT 100F is very flexible and pliable. This
coating looks identical to the UT-100, but is used on wood and
fiberglass, or wherever there is more movement and swelling. UT-100F
resists cracking on wooden decks, patios, boat docks, and fiberglass
boat decks.
UT 100AQ: UT 100AQ can be applied to submerged
surfaces, such as pools, wave pools, splash pads, pool decks, ponds,
etc. It cures to a firm and extremely durable rubberized surface, while
keeping the appearance of the other UT-100 coatings.
UT 50: UT 50 is made with 50% of the rubber aggregate
removed. This product is designed for commercial kitchens, restaurants,
waterparks and other lighter use surfaces.
UT 25: UT 25 contains no rubber aggregate and is used
as a floor sealant. This product is designed for a variety of uses
where floors need to be sealed for protection.
UG 100, UG 100SR, UG 100F, UG 100AQ, UG 50, UG 25: UG is a "glow in the dark" non-slip coating designed for wood, concrete, steel and aluminum. Ultra Glow glows up to 4 hours.
Product Photo Sample:
UT are manufactured in the US comes in a wide variety
of colors including the approved Safety Yellow & Orange colors
conforming to OSHA and other Regulations.
UT is a topical coating that is applied responsively
to each situation. Coatings can be added from a light and comfortable
to the barefoot result up to an industrial, heavy machinery usage
result.
Pricing varies upon surface and size of application. Price starts at $4 per square foot. UT colors:
- ASTM D4541-95
Pull Off Adhesion Tests
- ASTM F-510 Wear Tests
- ASTM-D-2794 Impact
Resistance Testing
- UV Testing
- Hot Tire Pickup Tests
- ASTM-F-609 Coefficient
of Friction Test |
The UT Product Series may conform to
Internal Revenue Code:
Section 44 Tax Credit and/or
Section 190 Tax Deductions.
 |
|
|
|